Installation
Receiving and Storing SLD Products
Receive and Inspect: SLD products are double-wrapped in plastic and then boat-wrapped and palletized. SLD ships most products on open flatbed trucks. Occasionally a Conestoga trailer, hotshot team trailer, or box truck will be used depending on the ...
Siemens Rail Install Tool
Introduction: Siemens ceiling-supported equipment requires temporary rigging points within AirFRAME for the installation of the Siemens equipment. For this reason, SLD will manufacture a tool designed to be placed in these location for the ...
Installation Contractor Training
AirFRAME® installation should only be completed by contractors who have been trained by SLD Technology, Inc. Since some installation characteristics can change with custom systems, it is recommended that a contractor training session be booked for ...
Lens Logo Installation
AirFRAME® products ship with lens logo inserts loose to avoid damage and/or loss during shipping. They are intended to be installed by the installing contractor in opposite corners of the system with at least one being closest to the main door ...
Unistrut Embeds
Introduction: Hybrid room imaging equipment as well as other ceiling-mounted equipment supported by AirFRAME® is attached to the structure above using a bolt-on deep-channel Unistrut (P5500T) assembly manufactured by SLD. Due to the HSS tube steel ...
Perimeter Angle for AirFRAME®
In order to make a smooth aesthetic transition from the AirFRAME® to the hard lid ceiling, SLD Technology will send a trim that attaches to the outside of the AirFRAME's grid for the hard ceiling to rest on. These angle pieces are cut to fit in ...